1

Having a major problem with NetExtender and SSLVPN. This is a direct result of NetExtender no longer being auto launched once logged into an SSLVPN session.

Appliance is a NSA2600 and SSLVPN is properly configured, but has not been used in 2 years. I can log into and start a SSLVPN session fine, but since NetExtender does not auto launch to connect, you have to do it manually. Problem is, first there is no instructions that I can find anywhere as to what information needs to be put into the NetExtender connection boxes, and second when I fill in the boxes with what I believe should be the correct information, it never connects says username/password is incorrect, even though that very same username/password successfully logged into the SSLVPN connection to the NSA2600. For the server I am typing in the same address of the SSLVPN connect, which is the WAN IP of the NSA2600.

I know it must be connecting because I get the cert warning. Also I know it is connecting because if I type in something else for the server, I get a can not connect to server error.

Also odd is that on the NSA2600 doing a packet capture of the IP that the laptop has, there is no packets captured when doing the NetExtender connection attempt.

2 Spice ups
2

You should be able to go into your SonicWALL, go to SSL VPN - Server Settings and get the SSL VPN Port and the User Domain for login. Then are you using local accounts or doing an LDAP sync?

3

OK this is resolved. As it turns out I completely forgot to enter the port number on the server line.