Good Morning Guys,<\/p>\n
So I am thinking that I want to setup a VPN connection through the sonicwall. I am not going to lie, I have no idea how to set this up. I was hoping that someone could point me in the right direction with this?<\/p>","upvoteCount":3,"answerCount":12,"datePublished":"2013-10-30T13:44:18.000Z","author":{"@type":"Person","name":"camco707","url":"https://community.spiceworks.com/u/camco707"},"acceptedAnswer":{"@type":"Answer","text":"
Look at this i think this can really help<\/p>\n
VIDEO
camco707
October 30, 2013, 1:44pm
1
Good Morning Guys,
So I am thinking that I want to setup a VPN connection through the sonicwall. I am not going to lie, I have no idea how to set this up. I was hoping that someone could point me in the right direction with this?
3 Spice ups
camco707
October 30, 2013, 1:46pm
2
So, this is where I am at right now. Check out the attached picture…
What are you using on the other end of the VPN? Is it another Sonicwall, or something else?
First of all you need to know the gateway from the other site what should be the ip of the wan from the second site, you need to set a secret key and after under network you need to set the desired networks (LAN) to be tunneled, you need to make the same modifications on the other side also.
Ervin
Look at this i think this can really help
VIDEO
Ervin
drew4086
October 30, 2013, 1:59pm
6
There is a wizard on the Sonicwall that will walk you through it, but as Ervin has mentioned you will need the WAN ip of the other device you are connecting to and then configure he other end with the same settings.
Drew
camco707
October 30, 2013, 2:50pm
7
Yes sir it is another Sonciwall!
camco707
October 30, 2013, 2:50pm
8
drew4086
October 30, 2013, 2:59pm
9
I just did a 2400 to a Tz190 over the week-end.
Run the wizard on both systems and all the settings “should be” the same. You will need the common passcode and each other WAN IP’s. The other thing that is important is you tell each device what local network can use the VPN and what remote network you will be accessing. If it is just the LAN subnet on each end then that is simple. If there are multiple networks on each end you will probably need to create an address group. The important thing here is you want them to be the same.
camco707
October 30, 2013, 3:09pm
10
Ok, I am going to run the wizard and see what happens. I will keep you posted!
camco707
October 31, 2013, 2:25pm
12
Thanks guys, I am still working on The VPN connections on the sonicwall.
